Rating 4.8/5
Rating 4.8/5We have over 30,000 customer reviews, with a company rating of 4.8 out of 5. To see our latest customer reviews, please visit our reviews page:
Simply add your item to cart to the value of £100 or more and you'll see free delivery automatically applied in cart.
Please note: This offer applies to Mainland UK delivery addresses. Scottish Highlands, Scottish Isles and other out of zone addresses are excluded from this offer and will attract a surcharge. See our Standard Delivery Charges for more information.
Browse through amazing Winter Sale deals now, plus save upto 60% OFF sale items. We have upto 30% Off Curtains, upto 20% Off Blinds & Bedding, upto 15% Off Fabric and other limited time deals.
Contact TerrysCurrently our customer service team is only taking phone calls relating to existing orders. To discuss an existing order, our phone number is provided by clicking here and logging into your account. For all other queries please submit a support ticket.
The dispatch estimate given here is in working days, indicating when this fabric is due back in stock. As soon as it arrives at our warehouse, it will be dispatched to you and you should expect to receive it within 2-3 working days.
While it is our goal to get fabric to you as soon as possible, unfortunately some of our fabric suppliers are still affected by social distancing within their warehouse, and so we are experiencing very sporadic deliveries from our suppliers resulting in longer than usual dispatch times, so please bear this in mind when ordering.
This is the most accurate dispatch times we have and we are updating them daily as the situation changes. This is the case not just for Terrys, but for other retailers of this fabric as well. Thank you for your understanding in these difficult times.
We sell our fabric by the metre, so the quantity you order is the length of fabric you will receive in full metres. We aren't able to supply our fabric in half or quarter metres, therefore you will need to allow for full metres in your calculations.
All of our fabrics are supplied as a single continuous length. So for an order of 20 metres (for example), you will receive a continuous length of fabric that is 20 metres long with no joins. If you place an order and for some reason it can't be supplied in a continuous length then we will contact you and discuss alternative options.
The disptach dates given here take into account order processing, manufacturing, quality control and dispatch. The dispatch estimates here are based on working days only, so excludes weekends and bank holidays.
3 inch pencil pleat is the classic heading used on curtains and is compatible with both tracks and poles. This heading gives a fullness of approximately double the rail width.
Based on the rail size you have entered we would recommend widths of fabric in each curtain.
The finished width of the curtain is adjustable rather than exact and each curtain is drawn to the correct width before hanging.
For tracks the curtain hooks will need to be inserted in the middle or bottom row of pockets on the curtain tape and for poles in the top row of pockets on the curtain tape.
Curtains with an eyelet heading are only suitable for use on curtain and preferably metal ones to avoid wear and tear by the eyelets.
We require the finished length to be supplied from the top of the pole, and the curtain will be made slightly longer then this to accommodate the additional 4cm (approx.) which sits above the pole.
Based on the length of the pole you have provided, we would recommend widths of fabric in each curtain.
The eyelets are approximately 40mm in diameter, and are suitable for curtain poles up to 30mm in diameter. Please be aware that you require at least 5cm clearance above your pole to allow for the upstand of the heading above the pole.
This eyelet heading is constructed by punched metal eyelets into a lightly stiffened curtain heading. They are placed at regular intervals and in an even number, across the top edge of the curtain. They create wide folds of fabric which fall into soft columns, rather than tight gathered or a hand tailored heading. Eyelets are particularly good as a curtain that “stacks back”, meaning when open each curtain will fold back tightly either side of the window. This is a good feature if you are limited by space or simply like lots of light in the room.
3 inch double pinch pleat heading is hand-tailored to an exact finished width which is not adjustable and which only fits the window it has been customised for. This heading gives a fullness of approximately 2.2 times the rail width.
Based on the rail size you have given, we would recommend widths per curtain.
This type of heading works best on a curtain pole and is not suitable for use with curtain tracks.
The curtain heading contains robust stiffening which is used to crisp folds, grouped in pairs, which are pinched together at the base of the stiffening to form fan shaped pleats.
Special hooks called stab hooks are inserted into the back of each pleat to facilitate hanging (these are supplied with your curtains). These are usually adjustable and offer a small degree of adjustment on the finished length, but it is important to measure the pole width accurately for this kind of heading.
If you have choosen eyelet as your heading type then you can also select the eyelet colour. Most curtains come with a number of different options.
Please note eyelet curtain rings can only be used on a curtain pole with a maximum diameter of 30mm - we would recommend a 28mm metal pole.
Polycotton Lining - This light filtering lining has a soft-sheen finish. It gives good structure and drape to curtains without adding too much weight; and provides good protection from sun damage.
Premium Sateen Lining - This polycotton-sateen lining has a soft-sheen twill finish, is more crease-resistant and is usually used to line medium to heavyweight curtains. It gives good structure and drape to curtains without adding too much weight; and provides better protection from sun damage.
Blackout - This is a thicker, heavier, tightly woven lining. The reverse is coated with a thin layer of foam that fills the fabric weave, preventing light penetration. Blackout lining can offer some thermal/insulating properties, but its primary function is to block light. It is usually cream or white and is ideal for bedrooms.
Thermal - The reverse of this lining is coated with a thin layer of aluminum or acrylic foam. This provides thermal qualities that can retain heat and reduce energy bills. It can also deflect heat to keep rooms cooler. Thermal lining can help to dampen sound and offers some blackout protection, but its primary function is to insulate.
Eyelet curtains - Measure from the top of the pole to the required finished length. We will then allow a small amount on the top of this length to account for the fabric that sits over the top of the pole (upstand).
Pencil pleat on a pole - When hung on a pole measuring from the bottom of the curtain ring to the fininshed length position, either sil length, below sil, or floor length.
Pencil pleat on a track - When hung on a track measure from the top of the track to the fininshed length position, either sil length, below sil, or floor length.
With this blind you can choose the colour of the chain you would like. The metallic options give the blind an expensive look, however other options may be available.
You can decide whether you would like to have the control mechanism on the left or the right side of the blind. If it is easier for you to reach one side of the blind rather than the other, then this makes adjusting the blind more convenient.
You can decide whether you would like to have the control mechanism on the left or the right side of the blind. If it is easier for you to reach one side of the blind rather than the other, then this makes adjusting the blind more convenient. On some roman blinds you can also choose between cordlock or sidewinder control type.
Cordlock has a nylon cord that you draw to raise and then you can lock it into place when it is in the required position. This cord can then be released to lower. A child safety cleat is supplied to neatly wind spare cord out of the way when it is revealed.
Sidewinder is a continuous chain mechanism with a low gearing, so it is more suitable for raising and lowering heavy or wide blinds. It is generally regarded as a better, premium headrail type. We would recommend this choice if your blind is over 120cm wide or if the blind is going to be regularly raised and lowered.
This option determines the way in which the fabric rolls. Standard roll means that the fabric sits behind the roller tube. Alternatively, reverse roll sits in front of the roller tube. This option is better when your window has handles that might prevent the roller blind from closing.
Face fixing brackets are secured behind the blind headrail. Top fix brackets on the other hand are secured above the blind headrail.
The Standard headrail allows cords to run down the back of the blind all coming across to one side and threaded through a cord lock system.
The Deluxe sidewinder has cords running behind the blind like the standard, however they wind up into cartridges inside the track. Plus the deluxe has a higher ratio gear so it is easier to open and close the blind, especially important for wider blinds.
You can choose whether the blind will lift open from the left or right side. Your choice will depend on whether you want easy of access to the blind cord, or if you want to make it less accessible to a child.
Different lining options are available for different circumstances. In particular you could go for a thicker blackout material to darken a childs bedroom, or to keep in heat. Alternatively lighter and thinner linings are available, which will keep a room lighter and cooler.
Here you can choose whether the blind slats will open to the left, to the right, split stack or centre stack. When the the blind is open the blind will stack as follows depending on option selected:
Usually you would choose an option to match your window or door frame. For instance if you install this blind in front of a sliding door you would ensure it opens the same way as the door.
With a made to measure wood venetian blind - the slats will be trimmed to your custom measurements. This will expose the base wood colour on both sides of the blind. When your blind is fitted within a window recess, the outer edges of the slats are not visible and therefore this does not affect the finished look.
Should you be fitting this blind outside of the window recess - you may wish to pick the ‘Stain Wood Ends’ option for a small additional cost. This will ensure that the exposed ends of the slats are stained the same colour as the rest of the slats.
With tape colour there are a number of colour options to choose from. You could match your tape colour to the slat colour so they compliment each other, or alternatively go for a nice contrast.
You can choose the side of the head-rail that your blinds tilt and raise controls are situated. These are fully configurable, with the option to have tilt and raise on the same or opposite sides.
You can choose whether the blind tilting wand will be positioned on the left or right side. Your choice will depend on whether you want easy of access to the tilt wand, or if you want to make it less accessible to a child.
As this is a made to measure product, it is made to your exact measurements. This means that you are responsible for ensuring the blind is of the right size for your window. For an additional charge we will provide measurement insurance against incorrect measurements. For full details please see our terms and conditions.
Your name will appear in capital letters on your desired blind, and we will only print what you type within the personalised text box. For this blind just type the name you want to be printed. Character limit: 8 characters. For example: Jonathan, Laura, Thomas, Jess.
You can pick your own shirt number, ranging from 1 to 99.
Your name will appear in capital letters on your desired blind, and we will only print what you type within the personalised text box. You will need to include your name plus an apostrophe and S, or just an apostrophe if your name ends in a S.
Character limit: 9 characters (including special character such as apostrophe). For example Jonathan's, Laura's, Thomas', Jess'.
It couldn't be smooother.
Your purchase is sliced into 3 equal card payments.
The first payment is collected when the order is shipped. The remaining two will be automatically collected in 30 and 60 days.
No fees, no interest and no credit check. No impact on your credit score.
As part of our Winter Sale this product has an EXTRA 15% OFF. So be quick, while stock lasts!
For measuring advice on made to measure roman blinds or made to measure curtains please choose one of these options:
Please use this method if you want to fit your blind inside a window recess
Please use this method if you want to fit your blind outside of a window recess
Please press the full screen icon to see a full size version of this video guide.
Please press the full screen icon to see a full size version of this video guide.
The correct measurement method for your curtains varies depending upon the heading type that you choose. Please select the heading type below and this will direct you to the appropriate measuring advice:
Note: For eyelet curtains you will need to hang your curtains on a pole.
Measure the full width of the pole between, but not including, the finials and add 2.5-3 cm to the measurement for ease and overlap.
You should measure from the top of the pole to the required finished length, we will then allow a small amount on the top of this length to account for the fabric that sits over the top of the pole.
- For Sill Length - 1.5cm above the sill
- Below Sill Length - 15-25cm below the sill
- For Sill Length - 1.5cm from the floor
Curtain Poles - Measure the full width of the pole between, but not including, the finials and add 2.5-3 cm to the measurement for ease and overlap.
Curtain Tracks - Measure the full width of the track from end to end. If the track is in two overlapping pieces; measure both tracks separately and add the two measurements together.
If being hung on a pole measure from the bottom of the curtain rings, to the required finished length.
On a track measure from the top of the track to the required finished length.
- For Sill Length - 1.5cm above the sill
- Below Sill Length - 15-25cm below the sill
- For Sill Length - 1.5cm from the floor
Note: For pinch pleat curtains you will need to hang your curtains on a pole.
Measure the full width of the pole between, but not including, the finials and add 2.5-3 cm to the measurement for ease and overlap.
On a pole they will hang beneath the pole, so measure from the bottom of the curtain rings to the required finished length.
- For Sill Length - 1.5cm above the sill
- Below Sill Length - 15-25cm below the sill
- For Sill Length - 1.5cm from the floor
Please press the full screen icon to see a full size version of this video guide.
Please press the full screen icon to see a full size version of this video guide.
Please press the full screen icon to see a full size version of this video guide.
Please press the full screen icon to see a full size version of this video guide.
We have a number of fabric guides to help you consider your options. They offer advice on linings, tips on how to use fabric to make curtains and even a glossary of fabric related terms. To view more fabric guides click the button below.
At Terrys Fabrics we take child safely very seriously, and all our blinds come with a child safety device to help prevent injury. Please see the instructions supplied with your blind for full details on how to fit the supplied safety device.
Deluxe Sidewinder Headrail - For this headrail type you will be supplied with a retaining device, which should be fitted to keep the chain taught, to prevent children from getting tangled up on the chain. The advantage of this type of arrangement is that you do not have to remove the safety device to operate the blind and therefore provided the retaining device is properly fitted, there should be no instance of the chain hanging free.
Please contact our customer service department if you have any queries regarding the fitting of your safety device, and we will be happy to assist.
Simply add your item to cart to the value of £100 or more and you'll see free delivery automatically applied in cart.
Please note: This offer applies to Mainland UK delivery addresses. Scottish Highlands, Scottish Isles and other out of zone addresses are excluded from this offer and will attract a surcharge. See our Standard Delivery Charges for more information.
Colours & Accessories
Description
Press the product information button below for more advice on this product and things to consider before making your purchase.
PT/CF/3684/937
This product also appears in the collections below. You can browse through these to find a number of similar products that may also be of interest.
We want you to find the perfect fabric for your home, so we offer free samples of all our curtain materials for you to gauge against the colour scheme in your home.
While we do our best to represent the true colour of the fabrics in our images, we understand that the pictures that you see may vary in colour from one computer to the next. Simply click on the sample button to receive a sample of the material and you can have a look at the fabric up close, for yourself!
Remember that our free samples only give a taster of the curtain material. We do our best to cut samples that show the full pattern of the cloth but it is not always possible to show the entire pattern for materials with larger designs. Each sample we send out is simply intended as a guide, to help you choose the fabric that best suits the interior of your home.
