How To Fit No Drill Roller Blinds
Important Fitting & Safety Instructions
Always read these instructions completely before fitting or using this product.
Unpack with care—do not use knives or any sharp objects on the packaging.
No Drill Tolerances
Not all windows are perfectly square, for any that taper inwards at the bottom of the window by more than 10mm (1cm) then no drill blinds will not be suitable. For example if the top of your window is 120cm but the bottom of your window is less that 119cm then you won't be able to fit no drill blinds within your window. For windows that taper outwards this isn't an issue, and no drill blinds would still be suitable.
No-Drill Roller Blind Installation
32mm Fitting Instructions 38mm Fitting Instructions
The No Drill system is created for those that do not have a drill, Cannot drill in a wall or find the whole idea of fitting a blind daunting.
Before starting, please ensure that you are capable of holding the blind and twisting the locking mechanism. Plus, make sure the space is clear and that there is nothing on the window seal or surrounding areas. If you are concerned about holding and twisting the blind then ask a friend or family to assist. Fitting time is less than 5 minutes!
First, check your mounting surface. The window recess must be a solid, suitable substrate. Surfaces that flex under pressure (e.g., unsupported plasterboard) are not compatible with the no-drill system.
Before mounting, confirm the twist cog is positioned close to the wall side; this ensures the plunger can operate correctly.
Step 1: Insert the Headrail
Place the plunger end into the recess. Apply firm pressure to compress the plunger, then gently guide the opposite end of the headrail fully into the recess.
Step 2: Set the Position
Move the blind to your desired final position within the recess. Before locking it, make sure there is sufficient clearance from any window handles or obstructions.
Step 3: Lock the Mechanism
Maintain a firm grip on the blind. Rotate the largest cog until it moves towards the fabric.
Direction Note: If the plunger is on the left, rotate away from you. If the plunger is on the right, rotate towards you.
Step 4: Secure the Chain
Insert the operating chain into the P-Clip. Remove the adhesive backing and press the P-Clip firmly onto the wall. Place the clip at the maximum possible distance from the control mechanism to keep the chain taut and safe.
Removing & Maintaining Your Blind
Removing Your Blind
Grip the blind firmly. To release the tension, rotate the cog in the opposite direction of Step 3.
- Plunger on the left: Rotate towards you.
Plunger on the right: Rotate away from you.
Gently guide the blind out of the recess once the tension is released.
Maintenance Tips
- If the blind is exposed to high humidity or direct sunlight, occasionally check the tension and tighten it using the cog if necessary.
- Check the product regularly to ensure all components are undamaged and the blind operates smoothly.
- To clean, simply use a dry, lint-free cloth to wipe the fabric.
