Fixing Roller Blinds
When roller blinds work well, these window treatments allow for versatility in letting in and keeping out light, heat, and curious eyes into the interiors. But these can also be a source of issues ranging from too fast to too slow actions in rolling up or down.
Luckily, the following easy-to-follow do-it-yourself steps in how to fix roller blinds will restore their original functionality. You can then save on the costs of professional repair or on new purchases to replace existing blinds.
Gather the Tools and Supplies:
Don't worry – the tools and supplies necessary in fixing roller blinds can be found in any home-owner’s shed. You will need:
• Screwdriver or hammer
• Tape measure
• Straight edge
You may also need duct tape and stapler when replacing torn material from the roller blinds.
Check the Mounting Brackets:
The first step is to check the mounting brackets. The goal: To determine that these allow the roller blinds to retract smoothly and freely as well as to confirm that these are level and aligned.
Check that the roller blinds are also not touching the frame and sides of the window as these retract. Otherwise, the frequent contact can eventually rip the edges of the blinds and, in turn, make them roll unevenly.
Ensure that the mounting are aligned and level using either of these two methods:
• Using your metal tape measure, check that the mountings are the same equal distance from the window's top to bottom areas. The roller blinds may not appear crooked to your naked eye but the measuring tape can reveal otherwise.
• Using a level, check that the mounted rolled-up shade is, indeed, on an even level. Look at the bubble – it should be completely centred.
If the roller blinds are uneven or misaligned on their mountings, just make the appropriate adjustments. This may be the only step necessary.
Adjust the Tension:
In most cases, the issue lies in the spring tension, which can be too tight or too loose.
First, if the blinds cannot be lowered or raised, then the spring is locked.
• Take the roller out of its brackets on the wall.
• Grab the pin using pliers; turn it clockwise, which will release the spring; let go of the pin quickly when you feel the tension, which will unlock the spring. Repeat these steps until the pin is unlocked.
Second, if the blinds are too difficult to raise, then the spring is too tight.
• Roll the shade to its "up" position and then remove it from its wall brackets.
• Unroll the shade partway using your hands.
• Put the shade back into its wall brackets. Repeat these steps until the blinds appear to be working well.
Yes, patience is required especially when the steps in how to fix roller blinds are repeated but the results will be well worth your efforts.
Replace the Fabric:
In many cases, the fabric must be replaced.
• Take the blind down from its wall brackets. Unroll it using your hands.
• Cut off or pull off the old fabric from the rollers depending on the design.
• Place the new fabric, ensure its alignment, and staple it into place.
Alternatively, you can repair torn fabric by using a small piece of duct tape over the damaged area.
Related Blind Collections
Finished reading this buying guide? Here are a selection of categories you may find useful: